Lorex CVC6941 Especificações descarregar pdf

Camera Specifications

Image Sensor 1/4” Color

Lens / Lens Mount

Video Format / Pixels

Horizontal Resolution

Minimum Illumination

Termination

IR / Night Vision Range

FOV (diagonal)

S/N Ratio

Sync. & Scan. Systems

Video Output

Power Consumption

NTSC: 640(H) x 480 (V)

420 TVL

0 LUX (IR LEDs on)

Video: BNC Female

Power: Barrel Female

18 IR LED/60 ft. / 18 m*

64 Degrees

> 48dB

Internal; 2:1 Interlace

Comp. 1.0 Vpp @ 75ohm

170 mA or 2W max

Operating Temp.

Dimensions

WxLxH

(with stand)

14°F ~ 122°F

(-10°C ~ 50°C)

2.6" x 4.2"" x 5.2"

66 mm x 107 mm x 132 mm

3.6 mm F1.8/ Fixed

Iris & Shutter Speed AES; 1/30 ~ 1/62,500 sec.

Power Requirement 12V DC ±10%

Weight (with stand) 0.6 lbs. / 0.26 kg

*IR illumination range under ideal conditions. Objects at or beyond this range

may be partially or completely obscured, depending on the camera

application.

IR BULLET CAMERA

English Version 1.0

QUICK START GUIDE

CVC6941

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

Lorex Technologies Inc.

As our products are subject to continuous improvement, Lorex reserves the right to modify product

design, specifications and prices, without notice and without incurring any obligation. E&OE

2.6"/ 66mm

5.2"/

132mm

4.2"/107mm

www.lorextechnology.com

IT’S ALL ON THE WEB!

Problem Solution

No Picture/Signal • Ensure your TV is on the correct input channel.

Common terms of an input channel: INPUT,

AV CHANNEL, LINE1, LINE2, AUX.

• If your camera is connected to a VCR/DVR,

ensure it is properly connected to your TV/

Monitor.

• Ensure connections are properly connected.

• Ensure all the camera power supply is

plugged in.

Picture is too bright • Ensure your camera isn’t pointed directly at a

source of light (e.g sun or spot light).

• Slide the sunshade (bullet cameras only)

forward to block excess light.

• Move your camera to a different location.

Picture is too dark • If using during the day, the camera may not

be getting enough light. Slide the sunshade

backwards to let in more light. Check the

brightness and contrast settings of the device

your camera connects to (TV/Monitor/DVR).

Night Vision is not

working

• The night vision activates when light levels

drop. The area may have too much light.

Picture is not clear • Check the camera lens for dirt, dust,

spiderwebs. Clean the lens with a soft, clean

cloth.

• Make sure that the cable run is within the

limitations specified in the section ' Cable

Extension Options'

Bright spot in video

when viewing camera

at night

• Night vision reflects when pointing a camera

to a window. Move the camera to a different

location.

BNC connection does

not connect to my TV

• Use a BNC to RCA adapter at the end of the

extension cable.

Troubleshooting

Option Cable Type

Regular BNC

(supplied with

camera)

180ft / 55m 3

'RG59' or

'Coax' or '

Coaxial' BNC

(sold separately)

300ft / 92m 5

Lorex Universal

Cable

(sold separately)

300ft / 92m 3

Max. Cable

Run Distance

Max. # of

extensions

Notes:

1. For optimal performance, consider using option 2 or 3. Preference for using the

same cable type for the entire distance.

2. Cable run recommendation based on typical camera power consumption (up

to 500mA). For specialty cameras with higher current consumption, maximum

cable run may be reduced. Consider providing power to the camera at the

camera side rather then at the end of the extension cable.

3. Indicators that your cable run may be too long:

• Video is permanently Black & White (even during day time)

• Video is distorted

Extend the cable run for your camera up to 300ft or more

depending on the cable type used. See table below:

Cable Extension Options

1 2

Resumo do Conteúdo

Página 1 - IR BULLET CAMERA

Camera Specifications Image Sensor 1/4” Color Lens / Lens MountVideo Format / PixelsHorizontal ResolutionMinimum IlluminationTerminationIR / Night Vis

Página 2 - Installation Tips

4. Connect the BNC end of the 60ft Extension Cable to the DVR / Observation System or to a TV/VCR:NOTE: Connect a BNC to RCA Adapter as needed to allo

Comentários a estes Manuais

Sem comentários

Lorex CVC6941 Especificações

Consulte online ou descarregue Especificações para Câmaras de segurança Lorex CVC6941. Lorex CVC6941 surveillance camera Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança Lorex CVC6941